FRONT ATTACHMENT / Cylinder Assembly of Lift Cylinder 1. Install rod bushing (12) to rod cover (16) by using a special tool and a press. 4. Install retaining ring (20) to rod cover (16). 5. Install U-packing (18) and buffer seal (17) to rod cover (16). NOTE: As for the special tool, refer to W3-9-22. 12 16 W4GB-04-02-012 2. Install retaining ring (11) to rod cover (16). IMPORTANT: Keep a special tool evenly in contact with the metal part of the dust seal. 3. Install dust seal (19) to rod cover (16) by using the special tool and a hammer. W4GB-04-02-016 Part R Detailed Mounting Direction of Backup Ring for Buffer Seal W4GB-04-02-017 6.
Install O-ring (14) and backup ring (13) to rod cover (16). 7. Install O-ring (15) to rod cover (16). NOTE: As for the special tool, refer to W3-9-23. W4GB-04-02-013 W4GB-04-02-014 W4-2-11 16 15 13 Special Tool Speci al Tool 19 16 19 Special Tool al Part 19 Met al Part