FRONT ATTACHMENT / Cylinder Assembly of Bucket Cylinder 1. Install rod bushing (12) to rod cover (23) by using a special tool and a press. 4. Install retaining ring (20) to rod cover (23). 5. Install U-packing (18) and buffer seal (17) to rod cover (23). NOTE: As for the special tool, refer to W3-9-22. 12 Special Tool 23 W4GB-04-02-012 2. Install retaining ring (24) to rod cover (23). IMPORTANT: Keep a special tool evenly in contact with the metal part of the dust seal (19). 3. Install dust seal (19) to rod cover (23) by using the special tool and a hammer. W4GB-04-02-016 W4GB-04-02-017 6. Install O-ring (14) and backup ring (13) to rod cover (23). 7. Install O-ring (15) to rod cover (23).
Detailed Mounting Direction of Backup Ring for Buffer Seal NOTE: As for the special tool, refer to W3-9-23. W4GB-04-02-013 W4GB-04-02-014 W4-2-21 23 18 17 15 13 1 1 4 Part R Part R Sp Sp ecial Tool 19 23 Special Tool Part 19 Metal Part