BODY (UPPERSTRUCTURE) / Pump Device REMOVAL AND INSTALLATION OF PUMP DEVICE Removal 1. Remove the cab with the floor plate attached. (Refer to REMOVAL AND INSTALLATION OF CAB in W2-1.) 2. Remove sems bolts (1) (6 used) from hydraulic oil tank (4). Remove cover (2) and suction filter (3) from hydraulic oil tank (4). Drain hydraulic oil. Main Pump Regulator Priority Valve Pump Delivery Pressure Switch Pilot Pump T4GB-01-02-009 1 : 14 mm 3. Disconnect hoses (5) (2 used) from main pump (6). Cap the open ends. Attach an identification tag onto the disconnected hoses for assembling. 2 3 4 W4GB-02-03-010 5 6 : 19 mm, 22 mm Control Valve W4GB-02-04-012 W2-6-1