14 TECHNICAL DATA NOTE: Above dimensions are based on the machine with rubber trucks and JPN bucket. JPN = made in Japan Specifi cations subject to change without notice. With unloaded digging bucket. Firm compacted soil. Operators must exercise extra caution and follow instructions in the operator's manual. Worse condition or heavier attachment to the above will decrease climbing angle.
KUBOTA EXCAVATOR Model name U17-3 Type Canopy Operating weight lbs.(kg) (including operator's) 3704 (1680) Engine Type Water cooled 4 cycle diesel engine with 3 cylinder Model name KUBOTA D902 Total displacement cc (cu.in) 898 (54.8) Engine power kW(Hp) SAE gross 12.7 (17.0) Rated speed rpm 2300 Performance Unit swing speed rpm 9.1 Travel speed Fast mph (km/h) 1.4 (2.1) Slow mph (km/h) 2.6 (4.1) Ground psi pressure (kPa) (With operator) [kgf/cm2] 3.7 26 [0.26] Climbing angle %(deg) 58 (30) Dozer Width X Height in.(mm) 39.0/48.8 X 10.2 (990/1240 X 260) Boom swing angle Left deg (rad) 65 (1.13) Right deg (rad) 58 (1.01) Pressure connection for attachments Max.
displacement (Theoretical) US gal (L)/min 7.13 (27) Max. pressure psi (MPa) [kgf/cm2] 2702 (18.6) [190] Fuel tank capacity US gal (L) 5.0 (19)