35 OPERATION OF TRACK WIDTH CHANGE AND DOZER 3 CAUTION To avoid personal injury: Do not operate in narrow track width [39in. (990mm)], it makes risk of the excavator tipping over, operate always in standard track width [49in. (1240mm)], except to pass through narrow space on a even ground. For changing the track width or using the dozer, set the track width change/ dozer select lever fully. If not, the excavator may unintentionaly move. 2. Push the control lever forward. ... The track width increases [from 39in. to 49in. (990 mm to 1240 mm)]. Pull the control lever backward. ... The track width reduces [from 49in. to 39in. (1240 mm to 990 mm)].
(1) Control lever (A) “Increase” (B) “Reduce” Operation of the Track Width 1. Set the track width change/dozer select lever to the “Track width change” position (B). 3. After track width change, be sure to set the track width change/dozer select lever to the “Dozer” position (A). (1) Track width change / (A) ”Dozer” dozer select lever (B) ”Track width change”