37 SERVICE PORT OPERATION NOTE: When the service port is not in use, fold the service port pedal forward. The pedal gets fi xed and can be used as footrest. This pedal is used to operate attachments such as breakers. (1) Service port pedal (A) “Fix” (1) Service port (A) Sends oil to the port (A) pedal (B) Sends oil to the port (B) DRIVING 3 WARNING To avoid personal injury or death: Before starting the engine, make sure that no one is near the excavator. Before operating the excavator, check the track direction. (Idler and dozer to the front of the excavator). (1) Port (A) (2) Port (B) Push the right of the pedal ( ) to send oil to the port (A).
Push the left of the pedal ( ) to send oil to the port (B). (A) ”Front” Avoid travelling across a slope or working sideways on a slope. IMPORTANT: When the service port is not used for a long period, dirt particles can settle in the lower part of the service port lines. When the plugs on the service port lines are removed to connect attachments, drain approx. 100 cc of oil per side. For breaker choices, contact your dealer. Max. Flow Volume Theoretical L min. 27.0 Max. Pressure psi [MPa (kgf/cm2)] 2697 [18.6 (190)]