Kubota — Transporting on a Truck

43 TRANSPORTING THE EXCAVATOR ON A TRUCK 3 DANGER To avoid personal injury or death: No directional changes should be made when the excavator is on the ramp. Should a change of direction be necessary, drive off the ramp completely and make the turn. When driving forwards or backwards onto the truck, or when swinging the upper body, make sure that neither the cabin or the gates of the truck will be damaged. Transporting on a Truck 3 WARNING To avoid personal injury or death: After loading the machine on the truck, lower the bucket and dozer onto the truck bed. Lock the swing frame with the swing lock pin. Prepare a platform to load or unload the excavator.

Take following steps when using ramps. 1. Apply the parking brakes of the truck, and block the drive wheels from both sides. When the excavator reaches the point between the ramps and the truck bed, halt and then move very slowly until the excavator reaches the horizontal position. Move the excavator onto the truck only with the arm completely pulled in. Otherwise the truck cabin could be damaged when swinging around the upper body. Do not jack up the machine using its boom to load or unload the excavator from the truck. Dangerous situation could arise. 2. Use mounting brackets to secure the ramp properly. Connect the ramps directly to the truck bed.