Kubota — Observe Following Procedures when the Machine is to be Operated After Long Storage

77 Periodic replacement of important component parts To ensure safety in operation, you are strongly requested to inspect and service the machine at regular intervals. For added safety, ask your KUBOTA dealer to replace the following important component parts. These parts are prone to degradation in material or subject to wear and tear with time. It is diffi cult to judge how much they have been affected at regular inspection. It is therefore necessary to replace them with new ones, whether wear is visible or not after a specifi ed time of use. If any of them is found to be worn before the specifi ed use. They must be repaired or replaced the same as other parts.

If any of the hose clamps are found deformed or cracked, the hose slamps must also be replaced. For the hydraulic hoses other than the ones to be replaced periodically, inspect them for the following points. If found loose or very worn, tighten and/or replace the hose. When replacing the hydraulic hoses, change their O rings and sealing components with new ones. For replacement of the important parts, contact your KUBOTA dealer. At the following periodic inspections, check the fuel hoses and hydraulic hoses as well. List of important component parts To prevent serious damage to the hydraulic system, use only a KUBOTA genuine hydraulic hose.

Inspection Interval Check points Daily Checks Oil leak at fuel and hydraulic hose connections and points Every month Oil leak at fuel and hydraulic hose connections and points Damages at fuel and hydraulic hose (cracks, chafing) Every year Oil leak at fuel and hydraulic hose connections and points Interference, deformation, degradation, twist and other damages (cracks, chafing) of fuel and hydraulic hoses No.

Component parts Q'ty Period 1 Fuel hose (Fuel tank-Fuel filter) 2 Every 2 years or 4000 hours 2 Fuel hose (Fuel filter-Fuel pump) 2 3 Fuel hose (Fuel pump-Fuel nozzle) 2 4 Fuel hose (Fuel nozzle-Fuel tank) 1 5 Fuel hose (Fuel tank-Fuel drain) 1 6 Hydraulic hose (Main pump suction) 1 7 Hydraulic hose (Main pump delivery) 4 8 Hydraulic hose (Boom cylinder) 2 9 Hydraulic hose (Arm cylinder) 2 10 Hydraulic hose (Bucket cylinder) 2 11 Hydraulic hose (Swing cylinder) 2 12 Hydraulic hose (Dozer cylinder) 2 13 Hydraulic hose (Service port) 4