PRECAUTIONS FOR THE REMOVAL 2.7 PRECAUTIONS FOR THE REMOVAL 43 • The draw hooks must be used only for the first aid and not for towing the machine. • Before moving the machine, make sure that the gearshift lever is in neutral and disengage the four-wheel drive. • Incorrect manoeuvres may result in serious injuries or even death. • To move the machine, use properly dimensioned steel cables; do not use worn cables or cables with broken strands (A), twisted cables (B), deformed cables (C). • During the removal, no one can be allowed to get near the ma- chines or the cable. • Do not get astride the cable. • Remove the machine only as much as necessary to permit the required repairs.
• Do not remove the machine in any way other than that indicat- ed in paragraph “3.15.1 HOW TO REMOVE THE MACHINE”. F RWA01920 F RWA01930 F RWA01920 CAUTION • The maximum applicable force for each draw hook is F = 6200 kg. • Use cables having the same length and draw continuosly and constantly, without jerks. • The drawing force must be parallel to the machine axis (advancement direction), in such a way as to avoid the ap- plication of sideward forces on the draw hooks. RWA05380 RWA05380