SAFETY LOCKS 3.1.2 BACKHOE LOCKS 5 RWA03650 58 The backhoe is held completely raised by a single coupling that does not permit the lowering of the boom. The other safety device regards the swing, which is locked, ei- ther in the central and in the folded position, by means of a pin. To lock the boom, proceed as follows: 1 - Fold the bucket and arm completely. 2 - Raise the safety lock (1) by pressing the control switch (led on) positioned on the side dashboard (See “3.3.2 pos. 20). 3 - Raise the boom completely and engage the safety lock (1) by pressing the switch again (led off). 4 - Rotate the boom and insert the antirotation pin (2). 5 - Install the safety chains (5) for the stabilizers.
6 - Stop the engine and shift the levers (3) to settle the safety locks. 7 - Engage the control lever lock (4). 3 4 3 4 RWA34830