INSTRUMENTS AND CONTROLS 3 - ACCELERATOR Use the accelerator with care, especially when the machine is under strain or is working in difficult conditions. Avoid any use- less acceleration to reduce consumption and extend the life of either the engine and the machine. 82 2 - BRAKE PEDALS DANGER • The brake pedals must always be connected in 3rd and 4th gear and when the machine travels on roads. • Non-compliance with this rule may result in serious acci- dents. • The brake pedals must always be connected in 3rd and 4th gear and when the machine travels on roads. • Non-compliance with this rule may result in serious acci- dents.
The machine is provided with two split brake pedals that make it possible to turn sharply in small work areas with many obsta- cles; with the right pedal it is possible to make sharp turns to the right, with the left pedal it is possible to make sharp turns to the left. When the pedals (2) are used individually, reduce the speed and keep the bucket as low as possible. The pedals must always be connected with each other by means of the connection pin (A) when using the higher gears and travelling on roads. A RWA13950 2 A A RWA13950 IMPORTANT • When the higher gears are engaged, the braking action is strengthened due to the automatic connection of the four- wheel drive. RWA13960 RWA13960