Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION EXPLANATION OF COMPONENTS LISTENING TO RADIO 1. Turn the starting switch ON, then turn power switch (1) ON. 2. Use band selector button (2) to select MW (AM), FM1 or FM2. 3. Select the station with the preset buttons (3). REMARK In case you do not promptly remember the number assigned to a certain preset station, press auto-store/preset scan button (4) for less than 0.5 second. The preset six stations will broadcast one after another for five seconds each. When the desired sta- tion broadcasts, press the button again and scan tuning stops. 4. If you want to tune in to a station that is not preset, use either seek tuning button (5) or manual tuning button (6). 5.

Adjust the volume, balance, and tone as desired. 6. When turning the radio OFF, turn power switch (1) to the left until it clicks. REMARK To switch to the radio when listening to a cassette, press the cassette eject button to stop the tape. If you insert a cassette when listening to the radio, the tape will start to play. LISTENING TO A CASSETTE TAPE 1. Turn the starting switch ON, then turn power switch (1) ON. 2. Set the cassette with the exposed portion of the tape on the right side and push it past the cassette door. The tape will automatically start playing.

If the arrow indicating the direction of play is pointing to the right, the top side is being played; if the arrow is pointing to the left, the bottom side is being played. When the tape reaches the end, it is automatically reversed and the other side starts to play. 3. When finishing with the tape, press the cassette eject but- ton to eject the tape and automatically switch to the radio. 3-61