Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION OPERATION 3 CHECK BEFORE STARTING ENGINE, ADJUST 3 WALK-AROUND CHECK 3 Before starting the engine, look around and under the machine to check for loose nuts and bolts, or leakage of oil, fuel, or coolant, and check condition of the work equipment and hydraulic system. Also check for loose wiring, play, and accumulation of dust at places which high temperatures. q Leakage of oil or fuel, or accumulation of flammable material around high temperature parts, such as the engine muffler or turbocharger, may cause fire. Check carefully, and if any problem is found, repair it or contact your Komatsu distributor. q Do not get on or off the machine from the rear.

Using this position is dangerous because it is easy to slip and you cannot be seen from the operator's compartment. Always use the handrail and step at the front when getting on or off the machine. If the machine is at an angle, reposition it level before checking. Perform the following inspections and cleaning every day before starting engine for the day's work. 1. Check for damage, wear, play in work equipment, cylinders, linkage, and hoses. Check that there are no cracks, excessive wear, or play in the work equipment, cylinders, linkage, or hoses. If any problem is found, repair it. 2. Remove dirt and debris from around the engine, battery, and radiator.

Check for dirt accumulated around the engine and radiator. Also check for flammable material (dry leaves, twigs, etc.) around the battery, engine muffler, turbocharger, or other high temperature engine parts. If any dirt or flammable materials are found, remove them. 3. Check for coolant and oil leakage around the engine. Check for oil leakage from the engine and coolant leaks from the cooling system. If any problem is found, repair it. 4. Check for oil leakage of oil from power train case, final drive case, hydraulic tank, hoses, and joints Check that there is no oil leakage. If any problem is found, repair the place where the oil is leaking. Check for leakage of oil from the undercover.

Check the ground for traces of oil leakage. 5. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 3-72 WARNING