Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION CHECK BRAKE PEDAL TRAVEL If the brake pedal stroke is not 70 to 90 mm (2.8 to 3.5 in) (below 70 mm or over 90 mm), the brake and steering force is too strong or insufficient. If the stroke is 91 mm (3.6 in) or longer, adjust it. 1. Depress the brake pedal all the way until it stops. 2. Check that the distance of travel (A) at the center of the pedal is 70 to 90 mm (2.8 to 3.5 in). 3. When this value exceeds 91 mm (3.6 in), or the brake fails to work, please contact your Komatsu distributor for adjust- ment. CHECKING WITH MACHINE MONITOR 1. Turn starting switch (1) to the ON position (B). 2. Check that all the monitors and gauges light up for approx.

2 seconds and the alarm buzzer sounds for approx. 2 sec. REMARK If the lamps do not light up, there may be a failure or discon- nection in the monitor, please contact your Komatsu distributor. 3-78 WARNING