Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION 3. Check that engine pre-heating pilot lamp (3) on the monitor panel lights up. 4. Maintain the key in the on position until the preheating pilot lamp (3) goes off. 5. When preheating pilot lamp (3) goes off, turn the key of ignition switch (2) to the START position (C) to crank the engine. The time that preheating pilot lamp (3) stays on changes according to the ambient temperature as shown in the table below. 6. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position (B). REMARK Immediately after starting the engine, run at idle.

While running the engine, release the decelerator pedal and do not operate the work equipment. Guideline for idle time Cold weather: At least 15 seconds 1st start after changing engine oil or engine oil filter: 20 seconds 3-92 Ambient temperature Preheat time -5°C to -10°C (23°F to 14°F) 20 to 25 seconds -10°C to -20°C (14°F to -4°F) 25 to 40 seconds -20°C to -30°C (-4°F to -22°F) 40 to 45 seconds