Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION STEERING MACHINE 3 q Avoid as much as possible turning the machine on a slope. The machine will tend to slip sideways. Particular care should be taken on soft or clay land. q Never make a pivot turn at high speed. NORMAL TURNING 3 When performing a counterrotation turn, the feeling of operation when your head is facing the rear is dif- ferent from the feeling if you are facing the front. Never carry out a counterroatation turn while facing the rear. To turn the machine while traveling, incline steering, forward- reverse, gear shift lever (1) in the direction to turn.

TURNING LEFT WHILE TRAVELING FORWARD NOTICE If the lever is moved partially to the forward or reverse position and then is moved in the direction of turn, the machine may carry out a counterrotation turn, so operate the lever fully to the forward or reverse position. If steering, forward-reverse, gear shift lever (1) is moved to the FORWARD position (F) and moved partially to the left (L), the machine will start to turn gradually. After that, the lever can be moved further towards the end of its travel to set the desired turning radius.

REMARK To turn gradually to the right while traveling forward, if the steering, forward-reverse, gear shift lever (1) is operated to the FORWARD position (F) and moved slowly to the right, the machine will start to turn gradually. After that, the lever can be moved further towards the end of its travel to set the desired turning radius. 3-106 WARNING WARNING