OPERATION OPERATION ADUSTING POSTURE OF WORK EQUIPMENT 3 ADJUST ANGLE OF BLADE EDGE 3 (Power tiltdozer only) It is dangerous if the work equipment moves by mistake when adjusting angle of the blade edge. Set the work equipment in a stable condition, then stop the engine and lock the work equipment securely with the work equipment lock lever. Adjust the angle ( θ ) of the blade edge to match the type of soil. The angle of the blade edge of the power angle, power tiltdozer cannot be adjusted. POWER TILTDOZER Turn the brace with bar handle (1) and the distance ( l ) between the joints to change the cutting angle ( θ ) as follows.
INCREASE distance ( l ) to INCREASE angle ( θ ) DECREASE distance ( l ) to DECREASE angle ( θ ). The standard for the cutting angle ( θ ) is 55°. The standard distance between the joints ( l ) is as follows. D61EX: 960 mm (37.8 in) D61PX: 960 mm (37.8 in) 3-112 WARNING