Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

MAINTENANCE SERVICE PROCEDURE 4. Continue to pump in grease until S becomes 0 mm. If the tension is still loose, the pin and bushing are excessively worn, so they must be either turned or replaced. Please contact your Komatsu distributor. WHEN LOOSENING TENSION It is extremely dangerous to release the grease by any method except the procedure given below. If the track tension is not relieved by this procedure, please contact your Komatsu distributor. 1. Loosen plug (1) gradually to release the grease. 2. When loosening plug (1), turn it a maximum of one turn. 3. If the grease does not come out smoothly, move the machine forwards and backwards a short distance. 4. Tighten plug (1). 5.

To check that the correct tension has been achieved, move the machine backwards and forwards. 6. Check the track tension again, and if the tension is not cor- rect, adjust it again. 4-27 WARNING