MAINTENANCE SERVICE PROCEDURE CHECK DOOR LATCH 4 (Machines equipped with cab) Hold the door open and check that there is still grease inside the latch. If the amount of grease is low or there is no more grease, coat the inside of the latch with grease from portion (1). REMARK If there is no more grease inside the latch, the movement will become poor because of dust inside the latch, and the handle may be stiff when opening the door. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID 4 (Machines equipped with cab) If there is air in the window washer fluid, check the level and add fluid.
Open the engine side cover on the left side, check the level of the fluid in window washer tank (1), and if it is low, add automo- bile window washer fluid. When adding fluid, be careful not to let any dust get in. PROPORTION FOR MIXING FLUID WITH WATER The proportion differs according to the ambient temperature, so dilute the washer fluid with water to the following proportions before adding. There are two types depending on the freezing temperature: -10°C (14°F) (general use) and -30°C (-22°F) (cold area use), so select according to the area and season. 4-35 Area, season Proportions Freezing temperature Normal Washer fluid 1/3: water 2/3 -10°C (14°F) Winter in cold area Washer fluid 1/2 :
water 1/2 -20°C (-4°F) Winter in extremely cold area Pure washer fluid -30°C (-22°F)