Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

EXPLANATION OF COMPONENTS OPERATION METHOD OF USING OIL AND FILTER MAINTENANCE MODE NOTICE This function is only a guideline. If dirty oil or filters are found during daily maintenance, replace them immediately. If the controllers or monitor panel are replaced, the timer for this function will not work properly. Contact your Komatsu distributor for replacement. In the oil and filter maintenance mode, the replacement inter- vals for oil and filters are displayed on display panel B (multi- information). (1) The item is displayed. (2) The time remaining until replacement is displayed. (3) The quantity of replacements until now is displayed.

The display items can be displayed in order by operating the information switch to the left or right ( ). q The timing of the 1st interval cannot be changed. If some special condition makes it desirable to change the 1st interval, use the maintenance mode in the operator mode to change the replacement interval as follows. First, set so that the system thinks that the 1st maintenance has been completed, then set the 2nd and follow- ing times. q (*) Although the marked item is displayed, it is not used with this machine.

3-26 Code Display Item Replacement interval 1st time (cannot be changed) 2nd and following times (can be changed) 01 ENG OIL Engine oil 500h 500h 02 ENG FILT Engine oil filter 500h 500h 03 FUEL FILT Fuel filter 500h 500h 04 HYD FILT Hydraulic oil filter 500h 2000h 05 CORR RES Corrosion resistor 500h 500h 06 BYPS FILT Bypass filter (*) - - 07 DAMP OIL Damper oil 500h 2000h 08 FNL OIL Final drive oil 500h 1000h 09 HYD OIL Hydraulic oil 500h 2000h 10 POWL OIL Power train oil 500h 1000h 11 POWL FILT Power train oil filter 500h 500h 12 HSS FILT HSS charge filter (*) - -