Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION EXPLANATION OF COMPONENTS CONTROL LEVERS AND PEDALS 3 (1) (2) (3) Work equipment lock lever Parking brake lever Steering, forward-reverse, gear shift lever (4) (5) (6) Brake pedal Decelerator pedal Blade control lever WORK EQUIPMENT LOCK LEVER q When leaving the operator's compartment, set the work equipment lock lever securely to the LOCK position. If the work equipment lock lever is not at the LOCK position and the control levers are touched by mistake, it may lead to serious personal injury. q If the work equipment lock lever is not set securely to the LOCK position, the work equipment may move and cause serious injury. Check that it is in the position shown in the diagram.

q When parking the machine or when carrying out maintenance, always lower the work equipment to the ground, then set the work equipment lock lever to the LOCK position. This lever (1) is a lock device for the work equipment control lever. (L) LOCK position: Work equipment does not move even when work equipment control lever is operated (F) FREE position: Work equipment moves according to opera- tion of work equipment control lever REMARK When starting the engine, to ensure safety, always set the work equipment lock lever to the LOCK position. 3-37 WARNING