Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION EXPLANATION OF COMPONENTS q Gear shifting When UP switch (U) or DOWN switch (D) is pushed, the trans- mission speed will change. UP switch (U): Each time the switch is pressed, the transmis- sion will up shift one speed. DOWN switch (D): Each time the switch is pressed, the trans- mission will down shift one speed. There are 3 forward and 3 reverse speed ranges. For details of the maximum speed in each speed range, see “SPECIFICATIONS (5-2)“. REMARK The speed range being used is displayed on panel A on the monitor panel according to the gearshift operation. Neutral: N is displayed on the display panel. FORWARD 2nd: F2 is displayed on the display panel. REVERSE 3rd:

R3 is displayed on the display panel. When the parking brake lever is locked, P is displayed. For details of the method of shifting gears according to the shift mode, see the “SHIFTING GEARS (3-101)“. Shift mode selection means that the selected speed range is displayed at the NEUTRAL position (N) before starting. q Operating counterrotation turn When operating the counterrotation turn, if the load on the left and right is not balanced, the machine may make a pivot turn, so check the ground conditions and be careful not to hit any obstacles when carrying out the operation. With the lever at the NEUTRAL position (N), move the lever partially in the direction of turn.

The left and right tracks will rotate in opposite directions, and the machine will make a slow counterrotation turn. If the lever is operated further, the speed of the counterrotation turn will increase. (R): Right counterrotation turn (L): Left counterrotation turn 3-39 WARNING