Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION EXPLANATION OF COMPONENTS BLADE CONTROL LEVER POWER ANGLE, POWER TILTDOZER This lever (6) is used to lift, tilt or angle the blade. q Lifting control (A) RAISE: Blade goes up (B) HOLD: Blade is stopped and held in this position. (C) LOWER: Blade goes down (D) FLOAT: Blade will move freely according to external force. REMARK When released from FLOAT position, this lever will not return to HOLD position, so it must be moved back by hand. If the engine is stopped when the lever is at the FLOAT posi- tion, the control lever will automatically return to the HOLD position. Before starting the engine, check that the blade control lever is at the HOLD position.

In cold weather, it will take time for the lever to be held at the HOLD position, so hold the lever by hand at the HOLD position for at least 1 second. q Tilting control (B) HOLD: Blade is stopped and held in this position. (E) LEFT TILT (F) RIGHT TILT 3-41 Condition of blade Amount of tilt STD blade D61PX D61EX Wide blade D61EX Right tilt 600 mm (23.6 in) 510 mm (20.1 in) 600 mm (23.6 in) Left tilt 600 mm (23.6 in) 510 mm (20.1 in) 600 mm (23.6 in)