Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

EXPLANATION OF COMPONENTS OPERATION CIRCUIT BREAKER 3 NOTICE q When resetting the circuit breaker, always turn off the power first (turn the starting switch OFF). q If the reset button for the circuit breaker comes out immediately when it is pushed in, it is necessary to carry out an inspection of the electrical circuit. If the starting switch does not work when it is turned to the ON position, the circuit has probably been cut off by the circuit breaker. Inspect the circuit breaker. REMARK The circuit breaker is a device installed in electric circuits where a large current flows. It is installed to protect the electric circuit.

It protects the electric components and wiring from damage caused by an abnormal current in the same way as a normal fuse. After repairing and restoring the location of the abnormality, there is no need to replace the breaker. It can be used again. 1. Open the cover at the bottom of the front panel. Circuit breakers (1) and (2) can be seen. (Circuit breaker (2) is installed only on machines equipped with an air conditioner.) 2. When the circuit breaker has cut off the circuit, reset button (3) springs out. Push reset button (3) in. 3-44 No Fuse capacity Circuit (1) 20A Starting switch (2) 20A Air conditioner