EXPLANATION OF COMPONENTS OPERATION ELECTRIC POWER TAKE-OUT ADAPTER 3 MACHINE EQUIPPED WITH CAB 3 NOTICE The power for the cigarette lighter is 24V. Do not use it as the power source for 12V equipment. The cigarette lighter socket (1) can be used as a power source for 24V equipment and the accessory socket (2) can be used for 12V equipment. Capacity of cigarette lighter : 120W (24V x 5A) Capacity of accessory socket : 60W (12V x 5A) MACHINE EQUIPPED WITH CANOPY 3 NOTICE q Do not use as a power supply for 12V equipment. This will cause failure of the equipment. q When using as a power supply pickup, do not install equipment which exceeds 120W (24V x 5A). 1.
Open the battery cover on the left side of the machine body. 2. There is the connector for the spare power take-off. (Connector CN800 (3) can be used.) REMARK Ground the negative wire to the body work or ROPS. Do not ground it to the rubber mounted engine or valves. This will cause failures. If the wire is grounded to a point where there is still paint, the electricity will not flow smoothly, so remove the paint. 3-48