EXPLANATION OF COMPONENTS OPERATION CAP, COVER WITH LOCK 3 Use the starting switch key to open and close the caps and covers. For their locations , see “LOCKING (3-116)“. Insert the key as far as it will go, then turn it. If the key is turned before it is inserted fully, it may break. METHOD OF OPENING AND CLOSING CAP WITH LOCK 3 TO OPEN THE CAP 1. Insert the key into the key slot. 2. Turn the key clockwise, align the key groove with mark (1) on the cap, then open the cap. Position (A): OPEN Position (B): LOCK TO LOCK THE CAP 1. Turn the cap until tight, then insert the key into the key slot. 2. Turn the starting switch key to LOCK position (B), then remove the key. 3-50