Safety - Section 20 08/11 OM2036 Page 20-4 PRECAUTIONS FOR TRUCK OPERATION Check fuel, lubrication, and hydraulic systems for leaks. Repair any leaks. Clean any excess oil, fuel, or other flammable fluids, and dispose of properly. Safety Is Thinking Ahead Prevention is the best safety program. Prevent a potential accident by knowing the employer's safety requirements and all necessary job site regulations. In addition, know the proper use and care of all the safety equipment on the truck. Only qualified opera- tors or technicians may attempt to operate or main- tain a Komatsu truck. Ensure a fire extinguisher is present and in proper working condition.
DO NOT operate the machine near open flames. Preparing For Operation Mount and dismount while facing the truck. DO NOT attempt to mount or dismount the truck while it is in motion. Use handrails and ladders when mounting or dismounting the truck. Safe practices start before the operator gets to the equipment! Safety At The Work Site Check the deck areas for debris, loose hardware, and tools. Check for people and objects that remain on or around the truck. When walking to and from a truck, maintain a safe distance from all machines, even when the operator is visible. Become familiar with and use all protective equipment devices on the truck.
Ensure that these items (anti-skid material, grab bars, seat belts, etc.) are securely in place. Before starting the engine, thoroughly check the area for any unusual conditions that could be dangerous. Examine the road surface at the job site, and determine the best and safest route. Ventilation For Enclosed Areas If it is necessary to start the engine in an enclosed area, provide adequate ventilation. Exhaust fumes from the engine can kill. Choose an area where the ground is as horizontal and firm as possible before performing the inspection.
If you need to operate on or near a public road, protect pedestrians and cars by designating a person for work site traffic duty, or by installing fences around the work site. The operator must personally check the work position, the roads to be used, and the existence of obstacles before starting the truck. Mirrors, Windows, And Lights Remove any dirt from the surface of the windshield, cab windows, mirrors, and lights. Good visibility may prevent an accident. Determine the travel roads to be used at the work site. Travel roads must be maintained in order to ensure safe machine travel. Adjust the mirrors to a position where the operator can see best from the operator's seat.
If travel through wet areas is necessary, check the depth and flow of water before crossing the shallow parts. DO NOT drive through water which exceeds the permissible water depth. Ensure the headlights, work lights, and taillights are in proper working order. Ensure that the machine is equipped with the proper work lamps needed for the operating conditions. Replace any broken mirrors, windows, or lights. Fire Prevention Thoroughly remove wood chips, leaves, paper, and other flammable items accumulated in the engine compartment, as they could cause a fire.