©1084 Big-end Bearing Removal Job Card No.: 02.05.01 Engine: S/BVM 628 Filing No.: 0178-06-10 1087 Job Cards: - 02.00.01 - 02.06.01 Tools: - Standard tools, - Possibly square timber, - Socket spanner (Section 1.8) Job: Bearing Removal with Piston Removal Observe Safety Precautions given on Job Card 02.00.01. On S/BV12/16M 628 engines use a ben tsok- sadece 12/16 cyl V makinelerde ket spanner to loosen the big-end bolts on cylinder A1. Turn crankshaft so that the big-end bolts (6) can be loosened with tool (piston approx. in TDC). Support cap (5) and unscrew bolts completely. Remove cap (5) out of crankcase. Take bottom shell out of cap (5).
Remove top shell when drawing the piston (Job Card 02.09.01). Wrap adhesive tape (no transparent Scotch tape), cleaning rag or oil paper around the crankpin to protect the oil bore against contaminati- on. Without piston removal The top shell can also be removed with the piston fitted. Remove support cap (5) as described under ”Bearing Removal with Piston Removal”. Place square timber underneath piston. Turn crankshaft slowly until the piston lowers onto the square timber revealing the freely hanging con- necting rod. Remove top shell. For assessment of shell wear pattern see Job Card 02.04.01. © 51 253 0 adece 12/16 cyl V makinelerde © 51 253 0 © 51 253 0