© 0583 Regulateurs Europa Ltd. Hydraulic Governor Linkage Setting Job Card No.: 05.04.14 Page 7 of 11 Engine: S/BV 6/8 M 628 Filing No.: 0178-29-10 1806 Then adjust distance between stop piston ("Stop" position) at point A15 (Fig. 10) and shock absorber. Lock grooved nut (*). © 24 932 1 Fig. 10 8. Refit the tools (see under 5.) , then check whether, at operating position of the spring- loaded cylinder A15 (Fig. 11) and contact of the control rods at the check stops (points A18 and A19), there is a clearance of approx. 15 mm. Secure grooved nut (*) with Deutz DW 59 as specified. © 24 933 1 Fig. 11 © 24 932 1 © 24 932 1 © 24 933 1 © 24 933 1