© 0582 Starting Air Master Valve Servicing Job Card No.: 10.03.01 Engine: S/BVM 628 Filing No.: 0178-32-10 1187 Servicing Tools: - Standard tools Dismantle master valve and clean. - Deutz S2 lubricating compound (Section 3.6) Job Card: - 05.00.01 Job Observe safety precautions (job 05.00.01). Discon- nect control air pipe. Remove valve from starting air pipe. Dismantling the Valve Carefully unscrew bolts (1). Cover (3) is spring-loaded. Remove cover (3). Take washer (2), adapter (6), spring (7) and piston (10) out of housing (8). Clean all com- ponents in diesel fuel and inspect for wear.
Examine especially joint faces between hou- sing (8) and piston (10) and of adapter (6) for corrosion and scoring. Smoothen as required. Replace O-seals (4) and (9). Inspect multi-disc seal (5) and replace if necessary. Reassembling the Valve Apply a thin film of Deutz S2 to sliding faces of (8), (10), (6) and to (4), (9), (5). Install piston (10) with O- seals (4) and (9) plus multi-disc seal (5), spring (7), and adapter (6) in housing (8). Fit washer (2). Secure cover (3) to housing (8) by bolts (1). Following reassembly, start engine several times to check mater valve for proper working and freedom from leaks. © 51 351 0 © 51 351 0 © 51 351 0