Deutz — 11.01.04 Exhaust Gas Thermocouples Removal / Refitment

© 0983 Exhaust Gas Thermocouples Removal / Refitment Job Card No.: 11.01.04 Engine: S/BVM 628 Filing No.: 0178-48-10 1841 Tools: - Standard tools The fastening location point (3) of the coupling socket is the temperature comparison point. Job Removing the Thermocouple Stop engine. Unscrew bolts (1) and remove cap (2). Pull plug (5) out of socket (4). Undo clamping union (9) and pull out complete thermocouple. If the job has to be done with engine running, the cover tube (11) of the thermocouple must remain in situ. In that case, undo union (6) and withdraw sensor (10). © 51 432 0 Refitting the Thermocouple Secure sensor (10) or complete thermocouple by means of union (6) or (9).

Couple up plug (5) to socket (4). Fit cap (2) and secure by bolts (1). When the engine is running, check exhaust tempe- rature reading. If necessary, carry out comparative test (Job Card 11.01.05). Do not bend line (8) sharply. © 51 358 0 © 51 432 0 © 51 432 0 Refitting the Thermocouple Secure sensor (10) or complete thermocouple by means of union (6) or (9). Couple up plug (5) to socket (4). Fit cap (2) and secure by bolts (1). When the engine is running, check exhaust tempe- rature reading. If necessary, carry out comparative test (Job Card 11.01.05). Do not bend line (8) sharply. © 51 358 0 © 51 358 0