Electrical System Argo Service Manual ii. Pull the lens from the headlamp location Photo 7 . Photo 6 Photo 7 iii. Remove the bulb by grasping the headlamp bulb fitting and turning 1/4 turn counter- clockwise. Installing the Headlamp Lens Assembly Models Prior to Serial Number 28922 (Rubber Bezel) i. Install the rubber bezel to the perimeter of the headlamp lens. ii. Push the lens assembly into the headlamp opening of the upper body with one hand while bracing it from behind with the other hand. Photos 8 & 9 NOTE Seat the plastic edge of the headlamp opening into the groove of the rubber bezel. Pull the rubber from behind to ensure it is seated properly to the inside of the vehicle.
Photo 10 iii. Install the headlamp bulb into the lens aligning the bulb assembly with the lens socket. Push in and turn 1/4 turn clockwise. Photo 8 Photo 9 Ontario Drive & Gear Limited www.argoutv.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-10