Electrical System Service Manual 15. Feed the wiring through the grommet of the rear tailight backing plate. Photo 20 13. Install the rubber grommet into the backing plate. Photo 18 16. Using the mounting bolts shown in Photo 21 , install the Right Hand tail light assembly to the required location. Orient the tail light assembly so that the vertical upright bulb (small) when installed, will be facing to the centre of the vehicle (for license plate illumina- tion). See Photo 24. Refer to the illus- trated parts list for mounting hardware details. 14. Remove the tail light mounting hard- ware from the bag.
Photo 19 Ontario Drive & Gear Limited www.odg.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-22