Service Manual Electrical System 33. Temporarily install the brushguard us- ing a single fastener at the top location. Photo 41 36. Locate the (2) two side tab mounts of the brushguard and drill from the bot- tom up. Photo 44 34. Ensuring the brushguard is straight across the front of the vehicle, drill the lower 3 holes in the brush guard frame from the bottom up. Photo 42 Ensure the brushguard is evenly spaced from the bumper on both sides at these tab locations before drilling any holes 35. Loosely install the hardware as in Pho- to 43 37. Mount each location with the hardware provided and illustrated in the parts list.
Photo 45 Ontario Drive & Gear Limited www.odg.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-27