Transport - 38 SK500 Operator’s Manual Haul Unload Crushing weight. If load falls or moves it could kill or crush you. Use proper procedures and equipment or stay away. NOTICE: Load and unload trailer on level ground. Attach trailer to vehicle before loading or unloading. 1. Lower trailer or ramps. 2. Remove tiedowns. 3. Open fuel shutoff valve (shown). 4. Start engine. 5. Pull lift arm control to raise mount plate (and attachment) off ground, but keep it low. 6. Slow engine to low throttle and slowly back unit down trailer or ramps. NOTICE: If unloading from tilt-bed trailer, be prepared for trailer to tilt. Unhitch Trailer 1. Stop tow vehicle and trailer on level ground. 2.
Put manual transmission into first or reverse gear or automatic transmission into park. Turn off ignition. Set parking brake. 3. Block trailer wheels. 4. Reverse “Hitch Trailer” steps on page 35 to unhitch trailer from tow vehicle. CMW t05om029c.eps