POWER STEERING 3B1-11 3 4 2 1 N3A0139E N3A0133E 4HF1 Engine Loosen three fixing bolts for power steering pump (Two on the flywheel side (1) and one on the cylin- der body side (2)) and remove them. Legend 1. Power steering pump drive belt 2. A/C compressor drive belt 3. A/C generator cooling fan drive belt 4HE1 Engine 1. Attach new O-ring and install hydraulic pump as- sembly to the engine. 3 4 2 1 N3A0138E Installation 4J Series Engine Tighten: Bolt and nut to Pump and bracket assembly: 19 N m (1.9 kg m / 14 lb ft) Oil pipe bracket: 19 N m (1.9 kg m / 14 lb ft) Clip bolt: 10 N m (1.0 kg m / 87 lb in) N3A0139E 2. Install booster outlet pipe (2) and nut. Tighten:
Nut to 23.5 N m (2.4 kg m / 17 lb ft) 3. Install power steering outlet flexible hose (1) and nut. Install the drive belt for the power steering pump and adjust the belt tension. Press the middle of the belt with a 98N (10kg) weight to measure the de- flection of the belt. Belt Deflection 8 — 12 mm (0.315 — 0.472 in) Tighten: Nut to 23.5 N m (2.4 kg m / 17 lb ft) 4. Connect hydraulic booster inlet hose (3). 5. Connect power steering inlet hose (4). 6. Install clips for hydraulic booster lines. 7. Connect air intake hose.