VARIO cutterbar | Rapeseed cutterbar –10 cm Standard +20 cm +50 cm You also benefit from the following additional advantages: The right cut. −High RPM stability in the engine, threshing and separation For grain harvesting, the cutterbar table can be extended by up to 20 cm or shortened by as much as 10 cm to keep the units and during the cleaning process crop flow even and ensure efficient, trouble-free working. −Extremely consistent performance −No load peaks in the threshing equipment For rapeseed, the cutterbar table can be moved forward by −Protection of the drives 50 cm.
Once the rapeseed plates are inserted, the rapeseed −Enhanced reel design with optimised reel tine carriers a table is ready for immediate use. −Hydraulic pump for rapeseed knives that can be switched nd bearings for significantly reduced risk of wrapping Hydraulically driven side cutters on the right and on the left on and off to reduce the power required and so (the latter can be switched on and off at will) can be fitted −Overload protection features protect against damage reduce wear quickly and easily without additional tools. The knife bar comes with an integrated hydraulic drive. Rapeseed requires particular attention.
Ripe rapeseed pods need careful handling during threshing because they often burst, causing grains to scatter in all directions. This is why the rapeseed deflector and extension are indispensable parts of the rapeseed equipment on VARIO cutterbars: they serve to keep losses to a minimum. The rapeseed equipment is stored in a lockable box on the trailer for road transport, thus saving a great deal of weight on the cutterbar. Knife position + 50 cm incl. rapeseed plates Knife position –10 cm Knife position +20 cm 27