Freightliner — Business Class

Engine 01 8. Inspect all pulleys for foreign objects, oil, or grease in the grooves. end of a breaker bar in the 1/2-inch square hole on the forward face of the tensioner, and rotating the tensioner down, away from the belt. When the breaker bar is slowly released, the tensioner should return to its original position. If not, see Group 01 of the Business Class ® Trucks Service Manual for re- placement instructions. Belt Tension Inspection NOTE: If engine drive belts require adjustment, see Group 01 of the Business Class ® Trucks Service Manual. NOTE: The following engines are provided with automatic drive belt tensioners: Caterpillar CFE, Detroit Diesel Series 55, and Dodge Magnum.

The following engines, which appear in Table 1 , are provided with automatic tensioners for the fan and alternator belts (and refrigerant com- pressor for Caterpillar C10/C12): Caterpillar C10 and C12 and Cummins B and C Series. Threaded-Adjustment Type 1. Apply the parking brakes, and chock the tires to prevent the vehicle from moving. 2. Install a belt tension gauge at the center of the belt’s longest free-span. Check belt tension. See Table 1 for belt tension specifications. 3. If belt tension is not correct, see Group 01 of the Business Class ® Trucks Service Manual to adjust belt tension.

Spring-Tension Type On belts equipped with a spring tensioner, the belt tension is automatically adjusted. Check that the ten- sioner is holding tension on the belt by inserting the Drive Belt Tensions Engine Component Belt Tension lbf (kg) Cummins B and C Series Refrigerant Compressor 100 (45) Alternator 105 (48) Cummins M11 Refrigerant Compressor 90 (41) Fan 160 (73) Detroit Diesel Series 50 Fan and Alternator 70 (32) Refrigerant Compressor 95 (43) Mercedes-Benz OM366LA Refrigerant Compressor 100 (45) or 140 (64) * Fan and Alternator 160 (73) Air Compressor 50 (23) * For a regular V-belt, tighten the belt to 100 lb (45 kg). For a Powerband ® V-belt, tighten the belt to 140 lb (64 kg).

Table 1, Drive Belt Tensions Business Class Trucks Maintenance Manual, July 1999 01/2