Safety USE PROPER TOOLS Use tools appropriate to the work. Makeshift tools and procedures can create safety hazards. Use power tools only to loosen threaded parts and fasteners. TS779 -UN-08NOV89 For loosening and tightening hardware, use the correct size tools. DO NOT use U.S. measurement tools on metric fasteners. Avoid bodily injury caused by slipping wrenches. Use only service parts meeting John Deere specifications. DX,REPAIR -19-04JUN90 TM1475 (23OCT95) 10-05-9 F510/F525 Front Mowers 131295 PN=14 PRACTICE SAFE MAINTENANCE Understand service procedure before doing work. Keep area clean and dry. Never lubricate, service, or adjust machine while it is moving.
Keep hands, feet , and clothing from power-driven parts. Disengage all power and operate controls to relieve pressure. Lower equipment to the ground. Stop the engine. Remove the key. Allow machine to cool. Securely support any machine elements that must be raised for service work. Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts. Remove any buildup of grease, oil, or debris. Disconnect battery ground cable (-) before making -UN-23AUG88 adjustments on electrical systems or welding on machine. TS218 DX,SERV -19-03MAR93 10 05 9