. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS 3. Lower the bucket horizontally until the bottom touches the ground. oil pressure, and within start the screen 3 - 123 4. Set lock lever (3) in th e LOCK position 5. Stop the engine. For details on the pro cedure for stoppin g the engine, see "STOPPIN G THE ENGINE (PAGE 3-99)". CHECK AFTER SHUT OFF ENGIN E Check the e fuel level on ngine coolan the machine t temperature, engine monitor. REMARK After stoppin approx. 10 seconds to t he ON o r STAR T position to engine agai before the st n, the monito arting switch r display was turn is not ed OFF reset, and th is displayed.
MACHINE INSPECTION AFTER DAILY WORK 1. 2. 3. 4. 1. Walk aro und the machine and check t he work equipment, machine exterior, and unde rcarriage, also check for any leak age of oi l or c oolant. If any pr oblems are found, r epair 2. Fill the fu el tank. 3. Check th e engine compartmen t for pa per and debris . Clean ou t any paper and debris 4. Remove any mud affixed to th e undercarriage