TESTING AND ADJUSTING MEASURING ENGINE SPEED MEASURING ENGINE SPEED k Be careful not to touch any hot part when remov- ing or installing the measuring tools. # Measure the engine speed under the following conditions. Engine coolant temperature: Within operating range Hydraulic oil temperature: 40 – 60°C 4. Start the engine and set the measuring condi- tion, then measure the engine speed. Set the fuel control lever to the low idling and high idling positions, and measure the en- gine speed at each position. 1. Remove the engine side cover (left). 2. Remove cover (1). # Use a filter wrench to remove and install the cover. 3.
Install adapter A2 and connect it to the body of multi-tachometer A1 . D31/37EX,PX-21 20-103