Komatsu — ASSEMBLY OF TRACK ROLLER ASSEMBLY

DISASSEMBLY AND ASSEMBLY IDLER ASSEMBLY ASSEMBLY OF TRACK ROLLER ASSEMBLY 1. Fit O-rings (15) to shaft (13) and assemble collar (12), then install ring (11). # After assembling, tighten plug (1) temporari- ly. 2. Using tool L4 , install floating seal (14) to collar (12). 3. Using push tool , press fit bushings (9) and (10) to roller (6). 2 Bushing press-fitting portion: Engine oil (EO30-CD) # Bushing press-fitting force: 29.4 ± 3.92 kN {3.0 ± 0.4 ton} # Precautions when assembling floating seal. 1) When assembling the floating seal, degrease and dry the parts indicated with thick line A (O-ring and mating face of the O-ring).

2) After assembling the floating seal, check that the angle of the seal is less than 1 mm. 3) After assembling, check that protrusion of the floating seal is within a range of 7 – 11 mm. 4. Install floating seal (8) to roller (6). # For details of the precautions when installing the floating seals, see Step 2, # Precautions when assembling floating seal. D31/37EX,PX-21 30-53