Track System Remove and Install Track Roller CAUTION: Grease in track adjuster cylinder is under extreme pressure. DO NOT remove grease fittings to release track tension. 01 0130 19 1. Turn check valve nut (1) one turn counterclockwise to release grease from track adjuster. T131588B –UN–12JUN00 2. Put a piece of pipe between the sprocket and the track chain and rotate track to retract the adjusting cylinder if required. 1—Track Tension Check Valve Nut CED,TX03399,5942 –19–24MAR00–1/4 3. Remove inner and outer rock guards and rear. (See Remove and Install Rock Guards in this group.) 4. Raise crawler high enough to remove rollers. Put shop stands under machine.
T131589B –UN–12JUN00 1—Track Roller Cap Screw (4 used) 2—Track Roller Continued on next page CED,TX03399,5942 –19–24MAR00–2/4 TM1859 (14JUL04) 01-0130-19 700H Crawler Dozer 071404 PN=69