OPERATION EXPLANATION OF COMPONENTS HOLD SWITCH 0. To fix the speed range when traveling in automatic transmis- sion, press switch (15) at the side of the left arm control lever knob. The transmission will be fixed in the speed range dis- played on shift indicator (A) on the machine monitor and shift hold pilot lamp (B) will light up. When the switch is pressed again, the display goes out. Use this function to select the desired speed range when trav- eling up or down hills or when carrying out operations such as grading. REMARK When the torque converter is in the lock-up condition (option), the transmission cannot be fixed.
When canceling the shift hold, operate the directional lever or gearshift lever or operate the AUTO SHIFT/ MANUAL selector switch to MANUAL. It is also possi- ble to cancel the hold shift by turning the starting switch OFF. FRONT WIPER SWITCH 0. When rotary switch (A) of this switch (16) is turned, the front wiper will move. If push button (B) is pressed, washer liquid will be sprayed out onto the front glass while the button is being pressed. Position(a): (OFF) stop Position(b): (INT)Intermittent wiper Position(c): Low-speed wiper Position(d): High-speed wiper REAR WIPER SWITCH 0. When lever (c) of this switch (17) is turned, the rear wiper will move. Position (a):
Washer liquid is sprayed out Position (b): OFF Position (c): Wiper is operated Position (d): Washer liquid is sprayed out, wiper is operated 3-45