OPERATION EXPLANATION OF COMPONENTS BRAKE PEDAL 0. When traveling downhill, use the engine as a brake, and always use the right brake pedal. Do not use the brake pedals repeatedly unless neces- sary. Do not put your foot on this pedal unless necessary. These pedals (7) operate the brakes. RIGHT BRAKE PEDAL 0. The right brake pedal operates the wheel brakes. Use the right brake pedal for normal braking operations. LEFT BRAKE PEDAL 0. The left brake pedal operates the wheel brakes. When the transmission cut-off switch is in the ON position, and if this brake is depressed, wheel brakes are applied and the transmission is set to the neutral position at the same time.
If the transmission cut-off switch is at OFF, the left brake pedal acts in the same way as the right brake pedal. REMARK When the accelerator is being used for operating the work equipment, always use the left brake pedal to slow or stop the machine after putting the transmission cut-off switch to the ON position. ACCELERATOR PEDAL WITH POWER FUNCTION 0. This pedal (8) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed.
Close to the end position of the accelerator pedal, the operator will feel an increasing resistance against further pushing down of the pedal and in this time the engine will be switched into power mode (kick down). 3-57 WARNING