Komatsu — BACKUP ALARM

EXPLANATION OF COMPONENTS OPERATION CAB DOOR OPEN LOCK 0. When getting in or out of the operator‘s compartment, or when operating with the door open, use this lock to hold the door in position. 1. Push the door against catch (1) to fix it in position. 2. When fixing the door in position, fix it firmly to the catch. 3. When getting on or off the machine, hold the handrail on the inside. 4. When closing the door from the operator‘s seat, push lever (2) up to release the catcher. 5. When closing the door after getting of the machine, push lever (3) down to release the catcher. CAB WINDOW OPEN LOCK CANCEL KNOB 0.

Use this knob when you want to move the door window glass up or down to open or close it. Grip lock cancel knob (1) to release the lock, and move it down to a lower lock position. Release lock cancel knob (1). There are 3 points for lock position (A). BACKUP ALARM 0. This sounds an alarm when the directional lever is set to the R position. It is used to warn people behind the machine that the machine will travel in reverse. If the alarm cannot be heard clearly or is too loud, adjust the volume as follows. REMARK The alarm is set to the highest level when the machine is shipped from the factory. 3-62