OPERATION EXPLANATION OF COMPONENTS SLOW-BLOW FUSE 0. If the power does not come on when the starting switch is turned ON, the slow-blow fuse may be blown, so check and replace it. The slow-blow fuse is beside the engine on the left side of the machine. SLOW-BLOW FUSE (1)120A: Heater relay (electrical intake air heater) 120A: Main power (2)30A: Battery power (starting switch, hazard) TAKING OFF POWER 0. NOTICE There are two power sources: 12V and 24V Check the voltage of the electrical equipment and select the appropriate power source. Mistaken use, such as using 24V as the power source for 12V equipment, will cause failure of the equipment.
When using the electric power source, do not install any equipment which will exceed the maximum amperage. When cigarette lighter (1) is removed, the lighter socket can be used as a 24V power source. Maximum amperage: 9A (216W) Electric power source (2) can be used as a 12V power source. Maximum amperage: 10A (120W) 3-65