OPERATION OPERATION CHECK ELECTRIC WRINGS 0. If the fuses frequently blow or if there are traces of short circuits on the electrical wiring, locate the cause immediately and carry out repairs, or contact your Komatsu distributor for repairs. Keep the top surface of the battery clean and check the breather hole in the battery cap. If it is clogged with dirt or dust, wash the battery cap to clean the breather hole. Check for damage and wrong capacity of the fuse and any sign of disconnection or short circuit in the electric wir- ing. Check also for loose terminals and tighten any loose parts. Check the wiring of the “battery“, “starting motor“ and “alternator“ carefully, in particular.
When carrying out checks around the battery, always check if there is any accumulation of flammable material around the battery, and remove such flammable material. Please contact your Komatsu distributor for investigation and correction of the cause. CHECK PARKING BRAKE 0. Check that the parking brake works properly. If there is any abnormality in the operation of the parking brake or the brake does not provide the prorer braking effect, please contact your Komatsu distributor for adjustment. CHECK BRAKE PEDAL 0. Drive the machine forward and check the effect of the brakes.
If there is any abnormality in the actuation of the brakes, please contact your Komatsu distributor to have the brakes adjusted. CHECK INFLATION PRESSURE OF TIRES 0. Measure the inflation pressure with a tire pressure gauge while the tires are cool before starting work. Check for damage or wear to the tires and the rims. Check for loose wheel hub nuts (bolts). The proper inflation pressure is shown below. NOTICE The optimum inflation pressure differs according to the type of work. For details, see “HANDLING THE TIRES ( 3-114 )“ . 3-74 WARNING Tire size Inflation pressure 26.5-25-20PR (L3 Rock) (standard) Front Tire: 0.41MPa (4.2 kgf/cm2, 59.6 PSI) Rear Tire:
0.34 MPa (3.5 kgf/cm2, 49.7 PSI) 26.5-25-20PR (L4 Rock) (option) 26.5-25-24PR (L3 Rock) (option)