OPERATION OPERATION OPERATION OF WORK EQUIPMENT 0. NOTICE The following describes a machine with 2-lever control. For machines with multifunction lever, see MULTI- FUNCTION LEVER ( 6-45 ). Lift arm control lever (1) and bucket control lever (2) can be used to operate the lift arm and bucket as follows. LIFT ARM OPERATION LEVER 0. Position (a): RAISE Position (b): HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force.
When the lift arm control lever is pulled further from the raise position, the lever is stopped in this position until the lift arm reaches the preset kick-out position, and the lever is return to the hold position. NOTICE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling works, see “LEVEL- ING OPERATIONS ( 3-103 )“. 3-97