Komatsu — LOADING OPERATIONS

OPERATION OPERATION V-SHAPE LOADING 0. Position the dump truck so that the direction of approach of the wheel loader is approx. 60 degrees from the direction of approach to the stockpile. After loading the bucket, drive the wheel loader in reverse, then turn it to face the dump truck and travel forward to load the dump truck. The smaller the turning angle of the wheel loader is, the more efficient the operation becomes. When loading a full bucket and raising it to the maximum height, first shake the bucket to stabilize the load before raising the bucket. This will prevent the load from spilling to the rear. PRECAUTIONS WHEN PILING UP LOADS 0.

When forming products into a pile, be careful not to let the rear counterweight come into contact with the ground. Do not set the bucket to the DUMP position when carrying out piling-up operations. REMARK When carrying out scooping-up work, avoid using the transmission cut-off function as far as possible. It will prevent the machine from moving back. When using the transmission cut-off function, adjust the cut-off position to match the amount that the brake pedal is depressed in order to ensure ample braking force. 3-105